Our adjustable awning brackets are designed to work with 6.5’ Roll-out Style Awnings from the manufacturer of your choice. They allow for a low travel height. When deployed in camp, can be telescoped up for providing headroom under your awning.
There are vertical outer tubes on the brackets which customer supplied 1.5” square tube slides inside. Your awning attaches to the end of the tubes. Then is locked in the up or down position with two pins per bracket to reduce potential rattles.
We offer two attachment methods:
Rack Side – These attach to the sides of Dinoot No Weld Corner Bracket style trailer racks via 6” horizontal stubs and corner brackets.
Crossbar End – These slide over the end of 1.5” square tube crossbars used with our Dinoot No Weld Rack Towers. You want to make sure they slide at least 4” over the end of the crossbars.
Rack Side Kits includes:
Pair of telescoping brackets with 6” long 1.5” square tube stubs
Two Dinoot No Weld Rack Corner Brackets
5/16” x 2 1/4" attachment bolts & nuts
Four 5/16” square wire lock pins
Crossbar End Kits includes:
Pair of telescoping brackets with 6” long 1.75” square tube stubs
5/16” x 2 1/4" attachment bolts & nuts
Four 5/16” square wire lock pins
Note:
Drilling of 5/16” bracket attachment and 21/64” pin holes is required. Customer supplies 1.5” tube slide, which your awning bolts to and telescopes in the brackets. Parts arrive bare steel and require paint to protect from rust.
